Name: Step 1 - Drain the Water
Uploaded: 2024-12-17T20:59:04.813396+00:00
Duration: 128 s
Channel: ALD OSHA
Description: Step one, we're going to kill the water and drain it down.

Step one, we're going to kill the water and drain it down.

<p>Step one, we're going to kill the water and drain it down.</p>

https://d3ev5earl6dvd0.cloudfront.net/public-media/videos/009/016/009016/video_OZ1cGkz.mp4#t=28

ALD OSHA

Step 1 - Drain the Water

StreamLabs Control device Introduction

Step 2 - Cut Into The Pipe

Step 3 - Cut Determined Lengths of Pipe

Step 4 - Press fittings

Step 5 - Tighten unions and check for leaks

Step 6 - Wiring

Step 7 - Download the app and pair it up

https://d3ev5earl6dvd0.cloudfront.net/public-media/videos/009/016/009016/video_OZ1cGkz.mp4

Hi, I'm Kevin Shanahan with American Leak Detection, here to Talk today about StreamLabs Control device. 
This is an automatic water shut off device that can link to your phone through an app and if there's an abnormal usage of water, it will send a notification. 
If the notification is not replied to, it will automatically shut off your water, thus saving you thousands of dollars in potential damage to your home.

Step two, we're going to be cutting into the sections of the pipe.

Step three, we're going to be cutting in our determined lengths of pipe to fit in the designated space.

Step four, we're on a testing facility and we put valves before and after each device. 
As you can see the others here now we're going to be pro pressing the rest of what's left after we've fitted everything correctly.

Step five, now we're going to tighten up our unions and then check it for leaks.

Step six, now we're going to be wiring it together.

The last step is to download the app, pair it up with the device after it's already been powered up.